Integrating Waste Management To Improve Business Productivity
Recently, governments have increased their incentives on business to employ environmentally friendly methods in their production lines. Therefore, it comes as no surprise that businesses are working round the clock to ensure that they adhere to the regulations.
Business waste management requires a collective effort from all the stakeholders. The employees and customers need to be sensitized on the importance of environmentally friendly practices to boost their eco-performance.
Production in business usually has many wastes ranging from energy wastage, residues, or solid wastes. You need to assess your production plan from purchasing, production, documentation, and packaging. Once you have assessed, identify the key areas that you can work on to minimize usage and wastage.
It would be best if you considered using biodegradable packaging materials that will reduce paper wastage. There are packaging materials that you can use that will help you cut on paper and plastic wastage. You can also choose to bulk purchase of materials needed to reduce the amount of packaging paper you will have.
In the past, electrical wires were manufactured using cloth wires to enhance insulation, longevity, and safety in the workplace. You easily damage the wires during daily production activities, and its disposal could create large volumes of unnecessary plastics.
Though you can recycle these wastes, the costs incurred compared to the systems’ service is a loss to the business. However, this industrial practice has been discontinued and restructured to alternative uses due to technological advancements.
Using Renewable Energy Sources also plays a significant role in reducing energy wastage. There will be fewer emissions into the environment, and you will also reduce the energy costs you use. The employees need to be sensitized on efficient energy management practices like switching off machines and lights that are not in use, proper usage of specific equipment, and immediate repair and service of machines once they break down.
Building and Construction
Contractors involved in building and construction have included energy and environmental management in their practice. Several businesses have taken the liberty to redesign the buildings to use efficient energy sources and recycled materials. This development is a step in the right direction of environmental management.
The wastes in the business need to be properly disposed of to observe hygiene and cleanliness. Poor garbage disposal techniques will endanger the health of the employees and the immediate community.
It would help if you employed recycling techniques like water treatment plants in the industry to reduce the toxicity of the waste. The types of strainers, baskets, and traps used in the water treatment plant play a significant role in the quality of the process equipment.
To ascertain the water treatment plant’s quality, you need to take a keen interest in the types of weaving employed in its manufacture. Be sure to investigate if the weaving matches your purpose of the plant and your content of waste.
Waste management is a gradual process that has its profitable returns. It helps you to cut down on some costs and increases productivity.
Redefining marine recycling through painting and sculpture
Frutos María Martínez, a self-taught visual artist, has been rescuing waste from the ocean’s waters for decades, turning it into beautiful and elegant artwork. Finishing his first painting and sculpture pieces at just fourteen, Frutos has spent his entire life guided by his passion for art. Becoming a professional artist in the mid-1980s after working at car dealerships, Frutos used his skills and expertise with metal to create sculptures and paintings, inspired by the materials he found along the Mediterranean Coast.
In his pieces, Frutos combines numerous medias to create sculptures, paintings, and collages. As part of his process, María spends time exploring the beaches and waters of Alicante, a Mediterranean city along the southeastern coast of Spain and his home since 1985.
Here, he has found all sorts of materials that have gone on to become pieces in his collections. Steel, iron, wood, nets, and textiles, among other objects, that Frutos salvaged from the ocean can all be found in his art.
By reusing and recycling these found objects, the artist is able to give new life to abandoned and forgotten waste. María recognizes the environmental issues we are facing at a global level, and his art seeks to raise awareness of these challenges. As his materials are pulled straight from the Mediterranean Sea, he is especially invested in taking care of marine life and our oceans. With each item the artist salvages from the ocean, one less piece of waste is polluting the waters.
Once the flotsam is collected, Frutos returns to his workshop where he creates works of art in different forms. While other artists may send their work to be fabricated by others, María could not imagine his pieces being created in a place other than his studio. Here, he uses his innate skills with metal and machinery to forge and construct works of beauty. His sculptures follow hard lines, both straight and curved, and his paintings exude color. When making his collages, he takes his found mixed media and creates new stories. He adds paint to wood that was floating in the sea or combines various materials together, reimagining a life for objects that were once trash.
With a true passion for his work, he creates through intuition. He explains that there is a moment when his art becomes completely emotional and personal, “each piece is imbued with my experiences and emotion, all lumped together, all conveyed by means of materials, technique, design and imagination.” The works his hands awaken and renew are the convergence of his mastery and his spirit, bringing new life to discarded objects.These fascinating pieces have been shown in numerous exhibitions, most recently at the Museum of the University of Alicante. There, the artist presented Acero y pecios del mar (Steel and Sea Wrecks), where two collections were displayed jointly, one offering sculptures focused on steel as a material and the other called Nueva Vida, or New Life, a collection whose pieces were created by recycling materials salvaged from sea wreckage. With this collection, he introduced a new layer into his work, adding an element of chaos and destruction to the backstories of his materials.
An earlier exhibition, Janus, displayed over 40 of Frutos’ sculptures on the University of Alicante’s campus. This exhibit, named for the Roman god of doors, gates and transitions, was influenced by the duality of life, of beginnings and ends, and of old and new. While his finished pieces reflect this duality, the materials used to create them manifest this theme through their first death being revived into new life, a tangible and concrete example of the contrasting polarity he was inspired by.
As with his sculpture-centered exhibitions, his shows highlighting his paintings are full of found materials. Pieces that Frutos creates hang with the weight of rescued and recycled materials, such as rusty iron, steel, and wood. This media has been taken from the ocean and included in his art, conjoining with resin, sands, and paint in bold and striking colors.
Frutos María’s ability to not only find new meaning in recycled and salvaged objects, but to clean up the oceans and make the environment less polluted, translate through his moving pieces of artwork, and because of this, he has made a name for himself in the art world.
Wind energy, the best way to invest into renewable energies
Over the last few years, wind energy has become the type of energy everyone can not stop talking about. This type of energy brings lots of benefits into the table when compared to more traditional sources of energy, like the energy proceeding from radiation or charcoal. Wind energy is cheap to produce, the most efficient renewable energy, and, most importantly, it is an ecological sensitive alternative.
Why should you invest in wind energy?
Wind energy is the energy of tomorrow. This type of energy made their big appearance during the XX century, when wind turbines would be used to bring energy to areas located far from the electricity grid, such as isolated farms, houses or factories.
During the XXI century, wind energy’s popularity kept on rising. Wind energy is as cheap to produce as traditional sources of energy, like radiation or charcoal burning, while falling into the category of renewable energies. This made wind energy become a top contender in the energy industry.
The wind industry’s future looks to be brighter than ever. The current generation is pretty aware of pollution and the effect it has on climate change. This has caused that governments all around the world start promoting new legislations and campaigns promoting renewable energy and, since wind energy is the most efficient type of renewable energy, it is expected that it will become the main source of energy by 2030. Now is the best moment to jump into the wind energy trend!
Making sure you set up an efficient wind farm
As it has been previously stated, wind energy is definitely an option you should consider if you are looking to power up any of your properties or business. However, setting up a wind farm isn’t a small investment, therefore, before starting this process we need to gather all the information we can about its viability. That is why we can not stop recommending that you consult with professional companies like Vortex FDC.
Vortex FDC is a company that has made a name for itself in the wind industry sector. Vortex assists their customers with all the information regarding wind resource they could need.
For example, an important factor we need to consider before setting our wind farm is the terrain. Not all terrains are appropriate to locate a wind farm, therefore, the terrain would need to be assessed before an installation that could result in a waste of assets if the terrain is not appropriate for it. Vortex FDC helps their customers evaluate where the wind farm is going to be placed, and providing information about the wind to choose the type of turbines that would yield better results in that area. Factors like the type of wind (extreme winds, turbulences, etc) or the temperature need to be taken into account when deciding which type of turbine would be more suitable for our wind farm. For example, if we plan to build a wind farm in an area that gets freezing and snowy in winter, we would need to get a turbine system that is cold resistant.
Vortex FDC runs a numerical weather model to feature all the variables that could affect the production levels of your wind farm, regardless of it being situated off-shore or in-shore. Thanks to their always up-to-date technology, you will be able to avoid unpleasant surprises regarding the energy production of your wind farm.
Overall, opting to use wind energy is an amazing idea that will benefit not only our budget, but also the planet. But, in order to do so, we need to make sure that wind farms are viable, and for that, we need to rely on professionals like Vortex FDC.
Saving the Planet? It Is a Local Issue
When we get caught up in common environmental issues, we start to think that it’s a bigger problem, that is down to centralised areas and big cities. And while urban areas are expanding, the route to sustainability as a solution comes from an approach beyond urbanism. Because urban areas bear the brunt because they have more CO2 emissions and larger carbon footprints, the thing to note in this respect that saving the planet is not necessarily a large-scale issue. In fact, it is a local issue.
The largest cities require urban developments, and this is a part of modern life. But when we go back to the 1990s, when sustainable city initiatives began emerging, we can see where the argument for the compact city began. This can have a positive impact on sustainability in a variety of ways but also improves greenhouse gas emissions. But this is where smaller communities can become invaluable.
Smaller communities have more power in many respects. From the perspective of local councils, it can be easier to incorporate an initiative that benefits the community, rather than having to go all the way to Westminster. Now, it can be easier to sign up for a local initiative, such as a solar community, rather than having to get permission from a higher power. And from the perspective of a community, it is far more controllable.
Saving the planet in an urban sense is about changing the infrastructure, which can take years, if not decades. However, smaller communities are able to utilise the location for the benefit of their immediate surroundings. This is something very important to note. Whenever you want to make a significant impact, be it in charity, or in the environment, it starts at home. As saving the planet is a local issue in this respect, it’s far easier to communicate the message. Smaller communities are in close contact. This means the message is easily spread. Throw into the mix community meetings, and how businesses look to develop on local issues, rather than spearheading initiatives overseas or in big cities, and it provides a tactical methodology to help on a small scale.
When you combine this with the fact that smaller organisations such as schools, naturally have a lower carbon footprint, this is the perfect opportunity to teach the younger generations how they can positively impact the world. Saving the planet is a local issue. We have to remember that if we are to make any impact, we have to look after our own. That’s not to say that we shouldn’t rely on large organisations or big cities to do the job, but if you want to do something right, do it yourself.
Saving the planet is something that we can control from our own home. From the practices that we preach to the examples we set, saving the planet is about keeping it close to home before you start to spread yourself far and wide. If every small town started to look after its own carbon emissions, this would pay for the country, and the world, several times over.
Best Strategies to Create an Comfortable Atmosphere in Your Restaurant
Turn Your Passion into a Career: How to Make Money Doing What You Love
What are spamtraps and how to get them off your mailing list for good?
Top Tips for Moving Your Business to an Office
The popularity of role-playing games and the desire for the most spectacular miniatures is growing
Business10 months ago
How To Manage A Team Working Remotely
Health12 months ago
Inventor of a liposuction technique, Dr. Dario Bazzano shares tips on cosmetic surgery
Business11 months ago
How To Make SEO Work for Your Business
Business11 months ago
Revealed: The Key Factors That Do Impact Client Perception
Culture and Lifestyle11 months ago
Not Prioritizing Yourself Enough? Here’s How You Can Change It!
Students' Column11 months ago
How Students Are Learning To Focus Better
Business11 months ago
How To Scale Your Business In 10 Steps
Business9 months ago
4 Changes to Increase Your Bottom Line: Dip in Revenue? No Problem!